Best Multimeter for Work on Ship- Fluke 101 Digital Multimeter

$59.24

Fluke 101 Digital Multimeter

  Free worldwide shipping

Key features

  • Basic dc accuracy 0.5%
  • CAT III 600 V safety rated
  • Diode and continuity test with buzzer
  • Small lightweight design for one-handed use
  • Rugged, durable design
  • Automatic shutdown
  • Battery is easy to replace

Description

Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for ship electricians,  Electro Technical Officers . This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice, and  free worldwide shipping is good benefit on Electro Technical Officer Shop.

Key features for Fluke 101 Digital Multimeter

Auto Power Off
The Product automatically powers off after 20 minutes of inactivity.

How to Measure ship AC and DC Voltage with Fluke 101 Digital Multimeter

To measure ship ac and dc voltage:

1. Choose ac or dc by turning the rotary switch.
2. Connect the red test lead to the terminal and the black test lead to the COM
terminal.
3. Measure the voltage by touching the probes to the correct test points of the circuit.
4. Read the measured voltage on the display.

 

 

 

How  Electro Technical Officer, ship Electricians Measure Resistance on Ship

1. Turn the rotary switch. Make sure power is disconnected from the circuit to be
measured.
2. Connect the red test lead to the terminal and the black test lead to the COM
terminal.
3. Measure the resistance by touching the probes to the desired test points of the circuit.
4. Read the measured resistance on the display.

 

Test for Continuity with Fluke Digital Multimeter

With the resistance mode selected, push the YELLOW button once to activate the continuity

mode. If the resistance is <70 Ω, the beeper sounds continuously, designating a short circuit.
If the Product reads, the circuit is open.

 

How ship Electricians test Diodes  with Fluke Digital Multimeter

1. Turn the rotary switch to diod.
2. Push the YELLOW button twice to activate the diode test mode.
3. Connect the red test lead to the terminal and the black test lead to the COM
terminal.
4. Connect the red probe to the anode and the black test lead to the cathode of the diode
being tested.
5. Read the forward bias voltage value on the display.
6. If the polarity of the test leads is reversed with diode polarity, the display reading shows
7. This can be used to distinguish the anode and cathode sides of a diode.

 

 

Measure Capacitance with Fluke Digital Multimeter on Ship Electrical System

1. Turn the rotary switch to Capacitance.
2. Connect the red test lead to the Capacitance terminal and the black test lead to the COM
terminal.
3. Touch the probes to the capacitor leads.
4. Let the reading stabilize (up to 18 seconds).
5. Read the capacitance value on the display.

 

How  Electro Technical Officer on ship measure Frequency and Duty Cycle

To measure Ship frequency with Fluke Digital Multimeter:

1. Turn the rotary switch to see pic .
2. Connect the red test lead to the terminal and the black test lead to COM
terminal.
3. Measure frequency by touching the probes to the correct test points of the circuit.
4. Read the frequency on the display.

To measure duty cycle with Fluke Digital Multimeter on ship system:

1. Turn the rotary switch to see pic .
2. Push the YELLOW button to switch to the duty cycle function.
3. Connect the red test lead to the see pic terminal and the black test lead to COM
terminal.
4. Measure duty cycle by touching the probes to the correct test points of the circuit.
5. Read the percent of duty cycle on the display.

 

 

Fluke 101 Digital Multimeter General Maintenance

Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
solvents. Dirt or moisture in the terminals can affect readings.
To clean the terminals:
1. Turn the Product off and remove the test leads.
2. Shake out any dirt that may be in the terminals.
3. Soak a new swab with isopropyl alcohol and work around the inside of each input
terminal.
4. Use a new swab to apply a light coat of fine machine oil to the inside of each terminal.

How to Replace Batteries on Fluke 101 Digital Multimeter

General Specifications of  Fluke 101 Digital Multimeter

Maximum voltage between any terminal
and Earth Ground ………………………………………. 600 V
Display (LCD) …………………………………………….. 6000 counts, update rate 3/sec
Battery Type ………………………………………………. 2 AAA, NEDA 24A, IEC LR03
Battery Life………………………………………………… 200 hours minimum
Temperature
Operating ……………………………………………….. 0 °C to 40 °C
Storage ………………………………………………….. -30 °C to 60 °C
Relative Humidity
Operating Humidity ………………………………….. Non-condensing when <10 °C;
≤90 % at 10 °C to 30 °C;
≤75 % at 30 °C to 40 °C (Non-condensing)
Operating Humidity, 40 MΩ Range …………….. ≤80 % at 10 °C to 30 °C;
≤70 % at 30 °C to 40 °C (Non-condensing)

 

Best Digital Multimeter for  Electro Technical Officers and ship Electricians – Fluke 101

This slideshow requires JavaScript.

Digital Multimeter Fluke 101 General Specifications

Operating ……………………………………………….. 2000 m
Storage ………………………………………………….. 12,000 m
Temperature Coefficient …………………………….. 0.1 X (specified accuracy) / °C (<18 °C or >28 °C)
Size (HxWxL) …………………………………………….. 130 mm x 65 mm x 27 mm
Weight ………………………………………………………. 160 g
IP Rating……………………………………………………. IEC 60529: IP 40
Safety ……………………………………………………….. IEC 61010-1: Pollution Degree 2,

© The Electro Technical Officer (ETO) | Disclaimer|Terms of Use|Privacy Policy|FAQ